Supercritical water gasification of lignocellulosic biomass: Development of a general kinetic model for prediction of gas yield

Supercritical water gasification (SCWG) utilizes water as the reaction medium to convert biomass into a mixture of gases (i.e., H2, CO2, CO, CH4, and other short-chain hydrocarbons) at typical operating temperature ≥ 400 °C and pressure ≥ 23 MPa. Understanding kinetics of SCWG processes is critically important for future development and scale-up application of the SCWG technology. Thus, this study aimed to develop a general kinetic model to predict the yields of gases from SCWG of various lignocellulosic feedstocks with varying contents of cellulose, hemicellulose and lignin. The model was established based on the experimental results from K2CO3-catalyzed SCWG of various biomass model compounds including cellulose, xylan and lignin at 450–550 °C for 10–50 min, followed by validation of the model using the experimental data obtained from SCWG of real biomass (i.e., corn stalk and pinewood) under same reaction conditions. The validation results showed that the general kinetic model developed could accurately predict the yields of gases from real biomass SCWG and the quantitative influences of temperature and residence time on the gas yield in biomass SCWG. Additionally, the kinetic model has been validated other SCWG data in the literature obtained with various facilities and different lignocellulosic biomass feedstocks. The development of the general kinetic model provides an applicable way to assess the potential of SCWG of various lignocellulosic biomass feedstocks for producing combustible gases at various conditions.